YD28 series double action thin steel plate stretch hydraulic

YD28 series double action thin steel plate stretch hydraulic

0.00
0.00
  
Product Description
First, use and characteristic:

This machine is the middle and small scale sheet metal product stretch formation ideal equipment. A is suitable for the liquid gas steel cylinder. B is suitable for the exhaust device, the liquid gas cookware, the metal basin metalloids thin steel plate product of the same kind. C has the fast installment in above model's foundation, and can take turn the punch holes, controls by PC.

This machine-pressed side installs for the combined type, the assembling and dismantling is convenient, causes the machine besides the adaptation stretch craft, simultaneously has the multi-purpose press's functions, widely is suitable for the plastic products, the dust product, the metal mold pressing product formation as well as the blanking, curving, crafts and so on adjustment, flange, press mounting.

The machine has the adjustment, manual, the automatic single cycle three workings. The working pressure, the power stroke may adjust willfully in certain scope. Has in the high lost motion speed and the reasonable scope adjustable stretch speed.

The machine operation is simple, the perform reliably, the service convenient, may the single plane work, may also form a complete set from the generatrix streamlined production.

The machine and has the oil discharge cooling system, may control the oil temperature, guarantee the machine continuously normal operation effectively.

2nd, outline:

This aircraft two major part is composed of the main engine and the control mechanism. Relate the construction through the hydraulic system and the electric installation

Becomes a whole. The main engine part including nearby the fuselage, the master cylinder, the pressure installs, goes against compositions and so on cylinder and sufficient fluid installment. The control mechanism including the actuating unit, the high and low range installment, the pipeline uses electricity part compositions and so on gas tank.

The actuating unit by the fuel tank, the high-pressure pump, the low-pressure control system, the electric motor and each kind of delivery valve and the direction valve and so on is composed. It is produces with the assignment work hydraulic pressure causes the main engine to realize each kind of movement organization.

The electric installation according to the hydraulic system stipulation's movement procedure, the working which the choice stipulated that refers to the discovery news leads, causes the related electro-magnet movement to complete the stipulation the craft operating cycle.

The actuating unit under electric installation's control, realizes the energy conversion through the pump and the cylinder; Realizes the capacity regulator through each kind of hydraulic valve; Through the fuel tank, the surge check valve and the pipeline realize the energy transportation, the actuation slide, the pressure marginal beam and go against the cylinder piston motion. Completes each craft movement the circulation.

This aircraft appliance has the adjustment, manual and the semiautomatic three working.

In the semiautomatic working acts according to the suppression technological requirement, divides into “has goes against the craft”, “not to go against the craft” and “the stretch craft” three craft movements.

Parameter name
Unit
YD28-63/100
YD28-100/160
YD28-200/300
YD28-315/400
YD28-400/630
Nominal strength
KN
1000
1600
3000
4000
6300
Drawing force
KN
630
1000
2000
3150
4000
Pressure-pad-force
KN
300
600
1000
800
2300
Liquid biggest working pressure
Mpa
28
28
28
28
28
Stretch slide stroke
mm
500
700
700
800
800
Nearby pressure slide stroke
mm
300
200
400
300
450
Stretch slide open height
mm
1100
1300
1400
1400
1700
Nearby pressure slide open height
mm
700
700
900
800
1150
Stretch slide size
About
mm
560
1000
1000
1260
2540
Around
mm
500
800
900
1200
1580
Pressure slide size
About
mm
560
1000
1000
1260
2540
Around
mm
500
800
900
1200
1580
Work table size
About
mm
560
990
1000
1260
1580
Around
mm
500
900
900
1200
1580
Electrical machinery total output
kw
7.5
22
30
22
42.5
Machine weight
kg
3500
12000
18000
19000
40000

* note: Because of technical and the craft improvement, this material like has parameter and so on product color, structure and weight modification further notices. This company retains regarding the material final right to interpret.
Inquiry
Current Location >
PRODUCTS CATEGORIES
CONTACT US

ADD: Bowang Special Economic Zone Industry Park,Maanshan,Anhui

MOBILE:+86-18655512099

TEL: +86-555-6062564
FAX: +86-555-6062577